Garbage Disposal Repair in Coats, NC

Why does my disposal keep jamming?

Occasional jams come from something hard getting into the chamber: a pit, a bone, a bottle cap or a twist tie. Frequent jams usually mean the unit is wearing out. As the motor weakens and the grinding parts dull, it struggles with scraps it used to handle easily. Fibrous foods like celery, corn husks and onion skins also wrap around the plate. To clear a jam, cut the power and turn the hex socket on the bottom of the unit with its wrench. If jams return within days, replacement is usually the better choice.

Could the drain be the real problem?

In Coats, it often is. About 55% of the town's homes were built before 1980, and the median home dates to 1978, per Census survey data. Older kitchen drains can be narrowed by decades of buildup, and the fine slurry from a disposal settles in those spots. If the disposal spins freely and the sink still drains slowly or gurgles, the trap or the line in the wall needs clearing. A plumber can usually tell which by pulling the trap and checking whether water flows freely beyond it.

Who handles sewer and permits here?

A 2018 Harnett County presentation to the state legislature says the county owns the wastewater system in Coats, now run by Harnett Regional Water. Grease and food solids settle in those lines, so keeping them out of the disposal helps. For permits, Harnett County Inspections provides plumbing inspections for Coats, but the county won't issue a building permit until the town grants a zoning permit. Outlying 27521 homes may be on Harnett Regional Water or private wells, and some aren't on municipal sewer.

Local note

Coats sits between Angier, Erwin, Benson and Lillington in eastern Harnett County. If your disposal problem shows up alongside slow drains elsewhere in the house, mention that when you call so the plumber comes ready to check the main line.

Until then, keep the disposal switched off and unplugged, clear the cabinet under the sink, and skip chemical drain openers. They rarely clear a disposal clog and can damage seals and make the job less safe for whoever opens the unit.