Drain Cleaning in Middlesex, NC

Middlesex in brief

Middlesex is a very small Nash County town of about 900 people, roughly 24 miles east of Raleigh. The Town handles water and sewer at Town Hall, collects wastewater and sends it to Raleigh for treatment. In 2024 it received $750,000 in a state grant round for water and wastewater repairs and upgrades. Housing is mixed: the median home dates to 1977, and about 55% were built before 1980, but about 23% have been built since 2010. Older homes may have cast-iron or clay drains; newer ones have plastic pipe that clogs mostly from grease, wipes and hair.

The Town is also replacing old 2-inch galvanized iron water mains with about 9,000 feet of 6-inch PVC and reconnecting about 60 services to existing meters. That project is on the water side; your drains and sewer line are separate.

Steps to take

1. Stop running water if a drain is backing up.
2. Count the slow drains. One means a local clog; several mean the main line.
3. Check the street. If neighbors are backing up, contact Middlesex Town Hall.
4. Plunge one fixture if it's safe. Don't use chemical drain openers.
5. Find your cleanout if you have one.
6. Call for a plumber if it doesn't clear.

Symptoms and causes

What affects cost

• Location of the clog
• Access through a cleanout or fixture
• The method used
• Repairs, which need a Town zoning permit and then a Nash County trade permit
• Timing of the call

In homes that mix old and new pipe, ask the plumber which sections are original; those are usually where repeat clogs start.

Rural homes outside town limits may not be on municipal sewer; a plumber can still clear the line out to a private system. Landlords should also know that Middlesex requires a rental inspection at each tenant change before a new water account opens.